Page 1 of 2 12 LastLast
Results 1 to 20 of 26

Thread: Garrett GTX and GT range pricing

  1. #1
    Junior Member
    Join Date
    Nov 2010
    Location
    Lincoln
    Posts
    9

    Post

    Prices excluding Turbine Housings (CHRA + comp cover only)

    GT3071R 1080
    GT3076R 1090

    GTX3071R 1100
    GTX3076R 1100

    GTX range will bolt directly in to the equivalent GT turbine housing. T3 flanged GT turbine Housings with 4 bolt discharge 270. A/R housings are 0.63, 0.82 and 1.06. The same range of housings with a V Band discharge are also available.

    GT series in Subaru turbine housing (ala MD321 T & H spec) are 1380

    I can also provide the GT35 + GTX35 units, along with internally gated options with T3 and T25 flanged options.

    Prices exclude plumbing and installation hardware.

    If you want a 'custom' turbo for a specific goal (i.e. alternate surge margin for higher boost at lower revs) then I have options available.

    Cheers

    Ian H

  2. #2
    Senior Member
    Join Date
    Feb 2006
    Posts
    2,324

    Post

    Inc or ex vat?

  3. #3
    Junior Member
    Join Date
    Nov 2010
    Location
    Lincoln
    Posts
    9

    Post

    All inc + 10 P&P
    It\'s only fun when it\'s not going wrong.....

  4. #4
    Senior Member
    Join Date
    Jun 2002
    Location
    North of Sweden
    Posts
    808

    Post

    What turbos an be had with a T4 divided vband turbine housing?

    Also how much is GTX4202R chra+comp?

    /Jan

  5. #5
    Junior Member
    Join Date
    Nov 2010
    Location
    Lincoln
    Posts
    9

    Post

    There are a good few with T4 option and V band, but as you are asking about a GT4202, I take it you want a 1100+HP single turbo? This range limits your choice, and I only deal with garrett 'based' units, so if best value is desired, then a Turbonetics is good, but a little heavy. GT42 have huge turbines and aren't exactly easily tuned......It's not something I would consider myself. The GTX4202R cost approx 2200 ATM. This isn't a quote!
    It\'s only fun when it\'s not going wrong.....

  6. #6
    22B Junkie
    Join Date
    Oct 2006
    Location
    Bournemouth
    Posts
    5,062

    Post

    Who are you btw ?
    Duncan

  7. #7
    Senior Member
    Join Date
    Apr 2009
    Location
    Saaarf
    Posts
    1,110

    Post

    Originally posted by Duncan Graham:
    Who are you btw ?
    The very same words I used when you said "you Jag?" at Paul's not too long ago!

  8. #8
    Senior Member
    Join Date
    Jun 2002
    Location
    North of Sweden
    Posts
    808

    Post

    Originally posted by Area Six:
    There are a good few with T4 option and V band, but as you are asking about a GT4202, I take it you want a 1100+HP single turbo? This range limits your choice, and I only deal with garrett 'based' units, so if best value is desired, then a Turbonetics is good, but a little heavy. GT42 have huge turbines and aren't exactly easily tuned......It's not something I would consider myself. The GTX4202R cost approx 2200 ATM. This isn't a quote!
    Well will haven non drag setup as well, so Was after something smaller then a GT37R and faster spooling that could be fited to the 4-2 headers I have from Gazza.

    If a GTX3082r can be had with T4 divided it would be a nice fast spooling setup, that could make some power.
    If Andy doesn't wake up and answer my pm that is

  9. #9
    Senior Member Andy Hughes's Avatar
    Join Date
    Jul 2010
    Location
    WRC bodied 2 door
    Posts
    2,034

    Post

    Originally posted by Duncan Graham:
    Who are you btw ?
    you would probebly get the same question asked to you if you went on any ford forum duncan,
    ian has been in the ford scene since as long as i can remember, and is very well respected within the ford community, he works along side harvey gibb and ahmed bajoo in building and engine dyno tuning, and has produced astonishing results from duratec engines seeing 800+ on various builds.
    he is a very clever guy and also very helpfull too.
    i ordered a GTX3076 stock mount from him and recieved it yesterday.

    andy h

  10. #10
    Senior Member
    Join Date
    Feb 2006
    Posts
    2,324

    Post

    I wanna see what the 3071's do

  11. #11
    22B Junkie
    Join Date
    Oct 2006
    Location
    Bournemouth
    Posts
    5,062

    Post

    Originally posted by andyscoobym3:
    </font><blockquote>quote:</font><hr />Originally posted by Duncan Graham:
    Who are you btw ?
    you would probebly get the same question asked to you if you went on any ford forum duncan,
    ian has been in the ford scene since as long as i can remember, and is very well respected within the ford community, he works along side harvey gibb and ahmed bajoo in building and engine dyno tuning, and has produced astonishing results from duratec engines seeing 800+ on various builds.
    he is a very clever guy and also very helpfull too.
    i ordered a GTX3076 stock mount from him and recieved it yesterday.

    andy h
    </font>[/QUOTE]Have never been into the Ford tuning scene Andy. Was just I didn't know who he was - have done a google search and found out now.

  12. #12
    Senior Member Andy Hughes's Avatar
    Join Date
    Jul 2010
    Location
    WRC bodied 2 door
    Posts
    2,034

    Post

    no probs bud

  13. #13
    Senior Member Justin A's Avatar
    Join Date
    Jun 2000
    Location
    Sprinting Nationwide
    Posts
    3,371

    Post

    Originally posted by Ren:
    I wanna see what the 3071's do
    +1 rotated twin entry

  14. #14

    Post

    Originally posted by Ren:
    I wanna see what the 3071's do
    Watch another space

    Justin, I doubt Garrett will make a twin entry exhaust housing for the 3071, but the MD321 version could always be rotated.

    It will be interesting to see on how an 11 blade GTX compressor wheel is going to perform over a 6 blade. You would expect an 11 blade to weigh much more, and having a much bigger surface area, be a lot laggier.

    It will also be interesting to see just where the original size exhaust wheels start to choke up on the Subaru's, because their size haven't changed.

    Mark.

  15. #15
    Senior Member Andy Hughes's Avatar
    Join Date
    Jul 2010
    Location
    WRC bodied 2 door
    Posts
    2,034

    Post

    Originally posted by Lateral Performance Ltd:
    </font><blockquote>quote:</font><hr />Originally posted by Ren:
    I wanna see what the 3071's do
    You would expect an 11 blade to weigh much more, and having a much bigger surface area, be a lot laggier.


    Mark.
    </font>[/QUOTE]probebly, but you would be talking mili seconds, the human would not be able to notice this, it would be that small if any, for the gain in power its massively worth it, otherwise GARRETT would not have developed these wheels.
    the main objective with these GTX turbos is, you can now have the power of a gt35r with the spool of the gt3076r. massive jump forward imo.

    andy h

  16. #16
    Senior Member
    Join Date
    Jun 2009
    Location
    Cheshire
    Posts
    153

    Post

    In time, will there be an option to upgrade an existing MD321t with a GTX wheel or core ?
    More importantly, will it be cost effective or should I just sell my T and buy a V or the GTX equivalent ?

  17. #17
    The Map
    Join Date
    Apr 2000
    Location
    0 to 60 in about 3 years
    Posts
    2,205

    Post

    Andy,

    Developing a compressor wheel and deploying it sensibly are not synonymous. Garrett are no stranger to putting together combinations that just "don't work"... try fitting a GT2876R if you doubt that statement. On the flip side of that they have made awesome units like the GT3071R, GT3582R, GT4088R etc.

    The GTX3071R will be interesting (as a GT3076R replacement). The GTX3076R may not be, in the same way the GT2876R isn't. The GTX3582R should be interesting again.

    Cheers,

    Pat.

  18. #18
    Senior Member Andy Hughes's Avatar
    Join Date
    Jul 2010
    Location
    WRC bodied 2 door
    Posts
    2,034

    Post

    i understand that pat and very good point, i have a GTX3076 ready to go on my car stock mount, and i am having a syvecs in the new year, i am very willing to borrow my car to you if you want to do a back to back test, on your equivalent or the new md equivalent.

    andy h

  19. #19

    Post

    Originally posted by ScoobyDan:
    In time, will there be an option to upgrade an existing MD321t with a GTX wheel or core ?
    More importantly, will it be cost effective or should I just sell my T and buy a V or the GTX equivalent ?
    Dan,

    A lot will depend on what power you're wanting to increase to, but there will certainly be billet up grades for the MD321 series in the very near future.

    I wouldn't sell the turbo yet, certainly until we've finished testing.

    Andy,

    You could easily be talking several hundred RPM, and that's something most humans would notice

  20. #20
    The Map
    Join Date
    Apr 2000
    Location
    0 to 60 in about 3 years
    Posts
    2,205

    Post

    Andy,

    Since I have yet to actually work with a GTX3076R I may be way off the mark; in fact I hope I am, always good to see alternatives appear...

    That said, I expect the GTX3076R to be similar in character to the GT3040R, albeit with less inertia, but ultimately strangled in the same way by an under-sized turbine for the compressor flow. This would probably work out OK on an engine that delivers more blow-down energy, thereby raising the stagnation pressure without increasing EGBP, but in an application such as a Subaru EJ most of that blow-down energy is lost in the runners, most likely with an increase in entropy. I was never too keen on the compromise that the GT3040R required; spool later compared to GT3076R but not far in front of a GT3582R yet not being able to get close to the GT3582R on flow.... that said I'de expect it to work reasonably well on a 4G63 or SR20. Indeed I suspect the GTX3076R will work well on that type of engine too, but Subarus are fussy about what does and doesn't work well.

    Thanks for the offer of borrowing the car for testing. Could be an interesting test [img]smile.gif[/img] Will have to see what is available at the time...

    Cheers,

    Pat.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •