Results 1 to 9 of 9

Thread: Sti V3 or 4 heads wanted

  1. #1
    Senior Member
    Join Date
    Jul 2000
    Location
    Norfolk
    Posts
    257

    As title - complete and in good condition please (!)

    Please e-mail if you can help.
    Thanks,
    Stan

  2. #2
    Senior Member
    Join Date
    Feb 2002
    Posts
    863

    Post

    Stan: Are you absolutely sure it is ver 3 or 4 you want and not ver 5 or 6?
    anybody got a flow bench? I can loan a set of STi ver 5 heads.

  3. #3
    Senior Member
    Join Date
    Jul 2000
    Location
    Norfolk
    Posts
    257

    Red face

    Hi Harvey,
    You have just increased my confusion level from "above average" to critical !!
    I assumed that as my car is a UK 98 (April -R plate) it needed Sti V3 or 4 heads to fit straight on without problems.

    I also believe that it would be difficult to fit V5 heads as the fuel rails/injectors would be different. ???

    Could you/someone please tell me exactly what I would have to change to fit V5 heads to my engine, and how "difficult/ straightforward it would be. (I have parallel fuel feeds to each bank of injectors) again

    Stan

    [This message has been edited by StanS (edited 25 January 2004).]

  4. #4
    Pblamire
    Guest

    Post

    Yes v3 or v4 heads.

    Assuming you have the coil on the middle of the manifold and not the pass. side.

    Paul

  5. #5
    Senior Member
    Join Date
    Jul 2000
    Location
    Norfolk
    Posts
    257

    Post

    Thanks for replying Paul.
    Yes I do have the coil pack on the top/middle of the manifold. Does the V5/6 have the coil pack somewhere else ?
    Stan

  6. #6
    Senior Member
    Join Date
    Sep 2002
    Location
    Sussex
    Posts
    1,752

    Smile

    Yes, it's offset to the passanger side of the manifold. ie. Not in the middle

  7. #7
    Senior Member
    Join Date
    Jul 2000
    Location
    Norfolk
    Posts
    257

    Post

    Right Dyney - I think I'm now beginning to get the picture of the coil pack on the V5/6 - its been moved !

    So I reckon from what Pat said in my "best cams" thread (which I have re read as I had forgotten most of what was said !) I should get V3/4 heads as the "easiest" way forward.

    So anybody selling any V3/4 Sti heads ???

    Edited due to poor memory, .....or did I ?

    Stan


    [This message has been edited by StanS (edited 25 January 2004).]

  8. #8
    tweenierob
    Guest

    Post

    YHM Stan

  9. #9
    Senior Member
    Join Date
    Jul 2000
    Location
    Norfolk
    Posts
    257

    Talking

    No longer looking for heads
    Stan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •