PDA

View Full Version : forged 2.5 long engine version 1 to 4



mattybr5
1st September 2011, 13:31
we have in stock a excllent fully rebuild 2.5 semi closed deck rebuild engine fully rebuilt by interpro automotive in bristol costing over 6000 to build

complete rebuild using a ej257 semi closed deck block machined to suit slightly over sized j.e forged pistons std sti con rods and a brand new subaru crankshaft all new acl race bearings used in the bottom end

alos heads have been fully rebuilt there version 4 wrx items with new valve seats/guilds seals and faced also brand new gaskets and seals and sensors also fitted aswell new belts ansd tensionors etc

engine was in fully working order perfect runner it does have that forged sound but normal as with almost every forge engine and has covered a little under 6000miles since built

engine doesnt use excess oil and no water and no leaks etc

engine was producing a very healthy 352bhp and 352lb/ft torq on a small vf28 turbo loads of graphs to prove

with right mods 450bhp shouldnt be no problem for this engine

engine is sold as a long engine no inlets/exhuast manifold or turbo etc but all parts are available sepratly at extra cost

1800 ovno

http://i310.photobucket.com/albums/kk415/mattybr5/UK%20SPEC%20TRACK%20CAR/reduk25053.jpg
http://i310.photobucket.com/albums/kk415/mattybr5/UK%20SPEC%20TRACK%20CAR/reduk25052.jpg


http://i310.photobucket.com/albums/kk415/mattybr5/UK%20SPEC%20TRACK%20CAR/reduk25054.jpg
http://i310.photobucket.com/albums/kk415/mattybr5/UK%20SPEC%20TRACK%20CAR/reduk25055.jpg