Results 1 to 5 of 5

Thread: 2.6 stroker

  1. #1
    Senior Member
    Join Date
    Mar 2012
    Location
    nottingham
    Posts
    132

    2.6 stroker

    Anyone had any dealings with a 2.6 stroker? and i dont mean the crappy cosworth 2.54 kit, i mean a full on 2.60+ kit like this,

    https://www.theboombopshop.com/Manle...r6-632405c.htm

    i found a thread on SN by WMS but not much info other than they were offering the kit.

  2. #2
    Senior Member
    Join Date
    Jul 2000
    Location
    Bucks
    Posts
    2,259
    Is this for road use?

  3. #3
    Senior Member
    Join Date
    Dec 2001
    Location
    Norn Iron
    Posts
    4,271
    With a strong block as a base, I'm sure it would have potential and the extra capacity would be nice for a road car.
    speed didnt kill me, but taxation probably will

  4. #4
    Senior Member
    Join Date
    Mar 2012
    Location
    nottingham
    Posts
    132
    yeah road use. 2.5 CDB converted block is my thinking.

  5. #5
    Senior Member
    Join Date
    Dec 2001
    Location
    Norn Iron
    Posts
    4,271
    Despite the short rod Subarus use etc, in general they are still a very short stroke engine. But you'd need to dummy build to ensure there is clearance for everything.

    For road use though I'd say it would be good fun.
    speed didnt kill me, but taxation probably will

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •